Water hygiene· · 5 min read
White-label monitoring for water hygiene contractors
How water hygiene contractors can offer remote temperature monitoring under their own brand: build, resell or white-label, who does what, and how the pricing works.
By Alessio Grespi, Founder & CEO
White-label monitoring lets a water hygiene contractor offer remote temperature monitoring under its own name, without building sensors or software. Your client sees your brand on the portal and the reports. Someone else runs the technology underneath.
This post covers why contractors are adding it, the three ways to do so, who does what in a white-label arrangement, and how the money works.
The problem with manual visits
Routine temperature checks are the least profitable work a water hygiene contractor does.
- Engineer time goes on travel. A skilled person drives between sites to run taps and write down numbers.
- The work does not scale. More contracts mean more vans and more people, in step.
- The price is easy to undercut. A monthly visit looks the same from every supplier, so it is bought on cost.
- Problems hide between visits. A calorifier that dips every night looks fine at eleven in the morning once a month.
Monitoring changes the shape of the work. Readings arrive on their own, and engineers go where something needs fixing. The recurring revenue stays with you, and it grows without adding vans.
Three ways to offer monitoring
| Build it yourself | Resell a branded product | White-label | |
|---|---|---|---|
| Whose name the client sees | Yours | The vendor's | Yours |
| Who owns the client relationship | You | Shared with the vendor | You |
| Who owns the intellectual property | You, after paying to create all of it | The vendor | The supplier owns the hardware, firmware and software. You own your brand, your clients and your contracts |
| Who owns the physical devices | You | Depends on the vendor's terms | Yours if you buy them upfront. The supplier's if they are folded into the monthly fee |
| Upfront cost | High: hardware, firmware, cloud and a team | Low | Low |
| Time to first site | A year or more | Weeks | Weeks |
| Who runs the technology | You | The vendor | The white-label supplier |
| Risk if the vendor sells direct | None | Real | Low, the supplier stays behind your brand |
Building in-house means becoming an electronics and software company on the side. Reselling is quick, but it puts another company's name in front of your client. White-label keeps the speed of reselling and the ownership of building.
On intellectual property, the trade is straightforward. White-label is affordable because the same design is shared across many contractors, so the design stays with the supplier. Owning it outright means paying for all of it, which is the build-it-yourself column.
What white-label means in practice
The split is simple. You keep everything the client sees and everything that needs water hygiene expertise. The supplier keeps everything that needs an engineer with a soldering iron or a server.
You do
- Sell the service and own the contract with your client
- Decide which points to monitor, from the risk assessment
- Install the sensors, or have the supplier do it
- Respond to alerts and carry out remedial work
- Put your name on the portal, the reports and the invoices
The supplier does
- Design and manufacture the sensors
- Run the connectivity, cloud and portal
- Keep devices updated and replace failed units
- Add your branding and set up your client accounts
- Stay out of sight of your clients
How the money works
The usual model is a monthly fee per monitored point. A point is one place a temperature is taken: an outlet, a calorifier flow or return, a tank.
- You pay the supplier per point, per month. With Paqett that one fee covers the device service, connectivity, cloud and the hosted portal.
- You set your own price to the client. The margin between the two is yours, every month, for the life of the contract.
- Hardware is either bought upfront or folded into the monthly fee. Buy upfront and the devices are yours. Fold them in and there is no capital outlay for you or your client, and the devices remain the supplier's, as with any rental. The firmware on them stays the supplier's in both cases.
- The cost per site follows the number of points. A large estate is worth more than a small one, without extra visits.
When you price it to a client, set it against what they pay today for routine visits, and against what a missed problem costs them.
What a pilot looks like
Start with one client who trusts you and one building.
- Pick the site. Choose one with a known trouble spot, so the data has something to show.
- Fix the point count. Sentinel outlets, calorifier flow and return, and any tanks.
- Agree the success measure. For example: every point reports reliably for two weeks, and alerts reach your on-call engineer.
- Agree the rollout price first. If the pilot passes, the next step should be a signature.
- Show the client their own data. A graph of their calorifier overnight sells the service better than any brochure.
A pilot can be live within two months, and a full rollout within four, subject to manufacturer stock.
Frequently asked questions
What is white-label monitoring? A monitoring service built and run by one company and sold by another under its own brand. The end client deals only with the seller.
Will my clients know who the supplier is? Not unless you tell them. The portal, reports and alerts carry your name.
Do I need technical staff to offer it? No. Your engineers install probes and respond to alerts. The supplier runs the devices, connectivity and software.
Does monitoring replace my engineers' visits? It replaces the routine temperature rounds. Risk assessments, flushing, sampling and remedial work still need your people.
How long does it take to get started? A pilot on one site can be running within two months.
Add monitoring to your service
Paqett builds and runs water hygiene monitoring that contractors sell under their own brand. Talk to us about a pilot on one of your sites.