All writing

Water hygiene· · 2 min read

Your rounds, plus the 29 days in between

A monthly temperature round is one reading per outlet. This is what the rest of the month looks like when a probe stays behind.

By Alessio Grespi, Founder & CEO

Both visit readings pass. The record between them does not.

Most water hygiene schemes run on a monthly round. An engineer visits, runs each sentinel outlet, takes the temperature and writes it down. Done properly it is good evidence: on that day, at that time, the water was at temperature.

Twelve readings a year

That is twelve readings a year for each point. A probe clamped to the same pipe and reporting every 15 minutes records about 35,000. The thermometer is not better. The measurement is the same one, taken often enough to see what happens when nobody is there.

What a round cannot see

Three kinds of thing can hide between visits:

  • A calorifier that drops below 60 °C overnight and recovers before the first person arrives.
  • An outlet that nobody opens for weeks, so the water sits in the pipe.
  • A return loop that sags when demand peaks and looks fine by mid-morning.

None of these is exotic. Each one can pass every monthly reading and still spend part of the month outside the limits in the written scheme.

A visit tells you what the temperature was at ten past nine. A probe tells you what it did for the rest of the month.

What monitoring does not replace

A probe measures temperature at the point it is fitted to, and nothing else. TMV servicing, sampling, inspections and the thermometer checks that keep the probes honest stay part of the visit. Where continuous records can stand in for manual temperature-taking is a decision for the risk assessment and the competent person, not for us.

What changes for the contractor

You hear about a problem when it starts, not at the next round. Your client gets a record for every point for the whole month. And the hours your engineers spend on site go on the work that needs hands.

That is the product we build for water hygiene contractors: the probes, the radio and a portal that carries your name.

Keep reading

Compliance· · 4 min read

Chain of custody for sensor data

Compliance data only counts if you can prove nobody changed it. What chain of custody means for sensor readings, where logbooks fail, and what to ask a vendor.

Water hygiene· · 5 min read

Manual vs automated Legionella monitoring

Monthly thermometer rounds or sensors? How manual and automated Legionella temperature monitoring compare on cost, coverage, records and risk, and when each makes sense.

Engineering· · 9 min read

Why per-device IoT pricing punishes fleets

Per-device and per-message IoT pricing scales with your success, not with what your fleet costs to host. A worked example at 1,000 and 50,000 devices, and the alternative.

Engineering· · 5 min read

What chip for what kind of device

ESP32, Nordic nRF or RAK3172: which chip suits which kind of device, and what each one costs you.

Get new posts by email

One email when we publish. Nothing else.

Or talk to us about a deployment: water hygiene, white-label or built to spec.